Why are my LED strip lights flashing? What happens if you overload an LED power supply? Both of these answers are linked with the same problem.

Check out our new vlog.

When you overload your power supply by drawing too much wattage from the output, your LED strip lights will begin to flash in a consistent pattern. Why?

Well, it’s because the LED power supply has something called ‘overload protection’. The power supply turns on, realises it is overloaded and then cuts out using the overload protection. It then turns on again and does the same thing – unless you reduce the wattage that the LED strips are drawing from the ouput. So what you can expect to see when this occurs is a consistent flashing of on / off / on / off.

To avoid this, always check the total wattage that the power supply can handle and make sure the total wattage of the LED strips is less than that number. It is advised to leave at least a 10% allowance for headroom (this will lead to longer product life, among other benefits).

For example, a 150w power supply should ideally run up to 135w of LED strip lights.  Remember this isn’t limited to how many strips you put on the output of the power supply, so you could have 10 LED strips – just as long as their total wattage adds up to no more than the 150w (ideally 135w).

Why InStyle LED?

We stock all of these LED strips for next day delivery.

We can cut and solder your LED strips to exact lengths for you, and can also solder in any corner links and custom length starter leads.

You can provide us with the lengths you need or, even better, a quick sketch of your area with the lengths written on them. We’ll advise you on the best way to wire the strips.

We can speak to your installers or electricians, to answer any questions – before, during and after your project.

Please call us today on 0116 2799083 or email sales@instyleled.co.uk